|
What are the flame retardants that do not contain PFBS-type sulfonates?
|
| The exclusion of PFBS is a key requirement to comply with the latest EU environmental regulations and represents a core choice in current PC flame retardant modification Based on compositional differences, these alternatives can be further categorized in |
| KSS,flame-retardant,kks |
|
EVERSUN |
|
How to Improve the Flame Retardancy and Drip Resistance of PA (Polyamide)?
|
| The Limiting Oxygen Index (LOI) of pure PA is approximately 21–24, classifying it as a flammable material Systematic modification is required to simultaneously achieve flame retardancy and suppress dripping Below is a targeted modification formulation |
| PA,Flame-Retardant,factory |
|
EVERSUN |
|
How to Improve the Flame Retardancy of PBT, and Is There a Modification Formulat
|
| PBT has an oxygen index of only 20–22, classifying it as a flammable material During combustion, it tends to produce molten drips To meet the stringent flame-retardancy requirements (such as UL94 V-0) in fields like electronic connectors and switch co |
| pbt,Flame Retardant,factory |
|
EVERSUN |
|
How to Improve the Flame Retardancy of PPO, and is There a Formulation?
|
| It is commonly used in high-temperature electrical components, insulating materials, and automotive applications To meet more stringent flame-retardancy standards, flame-retardant modification is necessary |
| PPO,flame-retardant,factory |
|
EVERSUN |
|
Formulation for Halogen-Free Flame Retardant PC/ABS
|
| The following formulation utilizes a "phosphorus-silicon " synergistic system to achieve efficient halogen-free flame retardancy for PC ABS The silicon-based component employs our SFR-Si907 silicone flame retardant synergist |
| PC ABS,Flame-Retardant,factory |
|
EVERSUN |
|
How Can PC Materials Balance High Transparency and High Flame Retardancy?
|
| SI907 is a hydroxyphenyl silicone flame retardant synergist developed by EVERSUN When used in PC flame retardant systems, it accelerates the char formation rate while maintaining high light transmittance and low haze The following formulation is designe |
| pc,flame-retardant,factory |
|
EVERSUN |
|
Key Points in Formulation Design for Hydroxyphenyl Siloxane Resin SFR-SI907
|
| As a flame-retardant synergist, the recommended addition level is typically 0 5–1 0%, and it is not advised to exceed 2%
It must be used in combination with a primary flame retardant to achieve a UL94 V-0 rating |
| Flame-Retardant,pc,factory |
|
EVERSUN |
|
What Problems Can Hydroxyphenyl Siloxane Resin SI907 Solve in PC Modification?
|
| YIMA SFR-Si907 is a high-efficiency silicone-based flame retardant synergist widely used in engineering plastics such as PC and PC ABS The recommended addition level is 0 5-1 0%, and it must be used in combination with a primary flame retardant |
| flame-retardant,silicone-based,factory |
|
EVERSUN |
|
DOW FCA-107 cannot meet PFAS regulations. Are there any alternatives?
|
| DOW FCA-107 cannot meet PFAS regulations Is there an alternative that is both compliant and widely applicable?The silicone-based flame retardant SFR-Si907, developed by EVERSUN, is precisely designed as a solution to this need This product is a hydroxyl |
| PFAS-free,flame-retardant,silicone-based |
|
EVERSUN |
|
Why 3310? Impact Mod's Multi-performance Balance Master
|
| Data Speaks for Itself,Why Is 3310 Hailed as the Master of Multi-performance Balance in Impact Modification? |
| Impact Modification,Moisture-heat resistance |
|
EVERSUN |
|
How to achieve UL94 V-0 rating for 1.5mm thick PC flame-retardant material?
|
| The following is a general conventional formula for PC modification, experimentally verified as an effective flame-retardant formulation The addition amounts may vary slightly under actual working conditions; |
| Formulation for PC modification,Flame Retardant, |
|
EVERSUN |
|
How to Reduce Costs for Flame-Retardant Films?
|
| Compared to the method of adding 25% flame-retardant masterbatch alone, the solution of compounding flame-retardant masterbatch with anti-dripping agent directly reduces costs by 25%-38%, meeting manufacturers demand for extreme cost reduction |
| PC,Flame Retardant,films |
|
EVERSUN |
|
From Reaction Inhibition to Structural Optimization: Yellowing and Compatibility
|
| Through the synergistic use of specific reaction inhibitors and precisely designed compatibilizers, dual regulation of the phase morphology and chemical reactivity of the alloy system can be achieved |
| PC PBT,Transesterification,Compatibilizer |
|
EVERSUN |
|
PC + 6% TiO2: How to resist glacial acetic acid?
|
| modifiers are required Different types of impact modifiers vary in chemical resistance—silicone-containing impact modifiers or silicone-modified PC can enhance the material s chemical resistance |
| Impact Modification, Chemical Resistance |
|
EVERSUN |
